Polyurethane blowing catalyst/Blowing catalyst

Polyurethane blowing catalyst/Blowing catalyst

Overview:

Product Name: Dabco BL-13

Alias: Dabco BL-13, Niax Catalyst A-133, Niax A-133, Jeffcat ZF-24, Foaming Catalyst Dabco BL-13, Polyurethane Foaming Catalyst Niax A-133, Foam Amine Catalyst, Strong Foaming Catalyst

Product Description: Easy to meter standard polyurethane foaming catalyst Niax A-133

Description: Niax A-133 is a standardized foaming catalyst for polyurethane.

Niax catalyst A-133 is a low concentration of bis(2-dimethylaminoethyl) ether, one of the most active polyurethane foam amine catalysts known. For convenience, Niax Catalyst A-133 consists of the pure amine ether BDMAEE diluted with dipropylene glycol monohydrate for ease of dosing and to allow for the use of conventional amounts in foam formulations.

Niax Catalyst A-133 can be used over a wide range with gel catalysts Niax A-33 or stannous octoate to control foam rise time without affecting the tin operating range.

Typical Physical Properties.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 0.98

Viscosity @20°C mPa.s 58

Freezing point ℃ <-50

Vapor pressure mmHg 0.0125

Solubility-water 20℃ completely dissolved

Solubility-Benzene 20℃ Completely dissolved

Refractive index 25℃ 1.43

Flash point (closed cup)℃ ＞90

Characteristics

1、Strong foaming catalyst

2、Easy to measure in low concentration

3、Better compatibility with gel catalysts

4、Compatible with polyol

Recommendations for use.

It is recommended that Niax Catalyst A-133 be used in soft sponge applications at 0.15-0.6pphp, in conjunction with other gel catalysts such as Niax A-33 and stannous octanoate to achieve a balanced foaming and gelation reaction.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.